Top Hat Bracket

Ideal for tying down roof battens to rafters or truss top chords

Pre-punched and formed galvanised steel timber connectors ideal for:
Tying down 70mm x 45mm roof battens to rafters or truss top chords in high winds areas.

APPLICATION

Screw Size NumberAllowable Wind Loads For 2 Type 17 Screws (kN)
Unseasoned TimberSeasoned Timber 
  J2 J3 J4 JD3 JD4 JD5
10 5.8 4.4 3.2 6.6 5.0 3.9
12 6.5 5.0 3.6 7.6 5.7 4.5
14 7.6 5.7 4.1 8.5 6.5 5.2

NOTES:
The above table uses withdraw capacities from AS 1720.1 - Timber Structures.

Fixing procedure:

  1. Nail fix each batten to rafter with minimum 2/75mm x 3.05Ø Multinail nails.
  2. Fix each side of bracket with one Type 17 screw as noted above.
  • Screws are Type 17, 50mm long galvanised batten screws.
  • Minimum end distance for:
    No.10 gauge screws 50mm.
    No.12 gauge screws 55mm.
    No.14 gauge screws 65mm..

DESCRIPTION AND PACKAGING

Manufactured from 1.5mm Galvanised G300 Z275 Steel

DescriptionProduct CodeReference CodeCarton quantityCarton kg.
175x30mm TA0423 THB70-100 100 9.0
30mm x 2.8Ø Multinail Nails (TA302)